Restorations we make

Bridges and Crowns – Khai Nguyen Dental Lab

Bridges and Crowns

IPS e.max ZirCAD Prime Zirconia

Easy – Cost-effective – Lifelike Natural Appearance: Just a few steps to produce aesthetic monolithic restorations.

Flexural strength (dentin)
1200 MPa
Origin
Liechtenstein

CE 0123

e.max ZirCAD Prime
Bridges and Crowns – Khai Nguyen Dental Lab

Bridges and Crowns

3M Lava Zirconia

According to 3M, Lava Esthetic is the first aesthetic monolithic zirconia with fluorescence built into the blank.

Flexural strength
800 MPa
Origin
USA
3M Lava Zirconia
Bridges and Crowns – Khai Nguyen Dental Lab

Bridges and Crowns

Dentsply Sirona Cercon Zirconia

Cercon is always regarded as a highly finished all-ceramic dental line. Its fit, translucency, and natural tooth-like grooves are all crafted to resemble real teeth.

Flexural strength
> 1,200 MPa
Origin
Germany

FDA

Sirona Cercon
Bridges and Crowns – Khai Nguyen Dental Lab

Bridges and Crowns

Dental Direkt DDBIO Zirconia

Dental Direkt (Germany) zirconia: the 3Y and 4Y blanks reach 1,150–1,200 MPa per the manufacturer catalogue; we use white and monochrome pre-shaded blanks.

Flexural strength
700–1200 MPa
Origin
Germany

FDACE 0482

Dental Direkt DDBIO
Bridges and Crowns – Khai Nguyen Dental Lab

Bridges and Crowns

DMax Natura Zirconia

It has the appropriate hardness and translucency for all types of restorations, from coping and full crowns to long bridges.

Flexural strength
900–1300 MPa
Origin
South Korea

FDA

DMax Natura Zirconia
Layered zirconia at Khai Nguyen Dental Lab: internal colour mapping on the left, the finished restoration on the right

Bridges and Crowns

Ceramill Zolid Zirconia

Amann Girrbach zirconia family from super-translucent FX Multilayer to HT+ for 14-unit bridges; we match the line to each case.

Flexural strength by line
700–1200 MPa
Max. bridge units
14

FDA

Ceramill Zolid
Dentalmax Luxen 1200+600 Multi zirconia disc in shade MA2

Bridges and Crowns

Luxen Zirconia (Dentalmax)

Dentalmax Luxen multilayer zirconia from Korea: 1200+600 Multi and 1100 Multi, up to 49% translucency and 1,100 MPa.

Cervical-layer strength
1100 MPa
Incisal translucency (1200+600 Multi)
49%

FDACE 2292

Luxen
Sagemax NexxZr+ white zirconia disc, 14 mm thick

Bridges and Crowns

Sagemax NexxZr Zirconia

Sagemax NexxZr zirconia from the USA: NexxZr T, NexxZr+, T Multi and NexxZr+ Multi, up to 1,270 MPa and 49% incisal translucency.

NexxZr T flexural strength
1270 MPa
Incisal translucency (Multi discs)
49%

FDACE 0123

NexxZr
U&C International Everest Multilayer PT (W ML PT) zirconia disc label

Bridges and Crowns

Everest Zirconia (U&C International)

U&C Everest multilayer zirconia from Korea: AT for anterior work, PT for posterior up to 1,250 MPa, and single-layer Razor 1300.

Cervical-layer strength (PT)
1250 MPa
Incisal translucency (AT)
48%

FDA

Everest
Kerox Zircostar 3D Multilayer zirconia blanks

Bridges and Crowns

Kerox Zircostar Zirconia

Kerox Zircostar HT zirconia from Hungary: preshaded blanks, 43% translucency, highest measured strength 1,350 MPa.

Highest measured flexural strength (FKG)
1350 MPa
Translucency (Zircostar HT)
43%

FDACE 2409

Zircostar
Whitepeaks Copran Zri white zirconia disc

Bridges and Crowns

Copran Zirconia (Whitepeaks)

Whitepeaks Copran Zri 3Y-TZP zirconia from Germany: white plus light, medium and intense, about 1,400 MPa flexural strength.

Flexural strength (white)
1400 MPa
Classic high-strength zirconia
3Y-TZP

FDACE 0483

Copran
Bridges and Crowns – Khai Nguyen Dental Lab

Bridges and Crowns

Zirconia – Let the professionals choose

Customers can request the type of material they desire. Khai Nguyen Lab will fulfill the customer’s requirements accordingly.

Zirconia grades
Veneers – Khai Nguyen Dental Lab

Veneers

IPS e.max Press

IPS e.max Press lithium disilicate glass-ceramic offers all the expected benefits of a pressable ceramic, resulting in restorations with excellent fit, shape, and function.

IPS e.max Press
Veneers – Khai Nguyen Dental Lab

Veneers

GC Lisi Press

According to GC, Initial LiSi Press is the first lithium disilicate ingot made with High-Density Micronization (HDM), giving pressed-ceramic strength and esthetics.

GC Lisi Press
Veneers – Khai Nguyen Dental Lab

Veneers

Shofu Vintage LD Press

Designed to meet the highest aesthetic demands, VINTAGE LD is a lithium disilicate ceramic system that offers natural aesthetics with varying levels of translucency and long-term stable durability.

Shofu Vintage LD
Veneers – Khai Nguyen Dental Lab

Veneers

Feldspathic (non-prep veneer)

Feldspathic (non-prep veneer) is a type of dental veneer made from feldspathic porcelain, a traditional material used in cosmetic dentistry. The standout feature of this veneer is that it does not require natural teeth to be ground down before placement, allowing for maximum preservation of the tooth structure. They are used to enhance the aesthetics of a smile by changing the color, shape, or size of the teeth without causing any damage to the original teeth.

Feldspathic veneer
Veneers – Khai Nguyen Dental Lab

Veneers

Onlay, Inlay, Overlay

Onlay, Inlay, and Overlay veneers are types of dental restorations used to rebuild damaged parts of a tooth without the need to cover the entire tooth.

Onlay, inlay, overlay
Veneers – Khai Nguyen Dental Lab

Veneers

Diagnostic Wax-Ups

Diagnostic Wax-Ups help patients and dentists visualize the final outcome of cosmetic or restorative procedures, such as veneers, crowns, or bridges. It is also a useful tool for accurate treatment planning, ensuring that the final result meets the patient’s expectations.

Diagnostic wax-ups
Implant Solutions – Khai Nguyen Dental Lab

Implant Solutions

Fixed Restoration Combo: Single Zirconia Crown on Titanium Abutment CAD/CAM

With the combination of an aesthetic zirconia crown and a durable titanium abutment, this service provides a perfect experience for patients.

Crown on Ti abutment
Implant Solutions – Khai Nguyen Dental Lab

Implant Solutions

Fixed Restoration Combo: Full Zirconia Bonded on TiBase

This process combines a monolithic zirconia crown with a TiBase, providing stability and the most natural appearance for the dental prosthesis.

Zirconia on TiBase
Implant Solutions – Khai Nguyen Dental Lab

Implant Solutions

Fixed Restoration Combo: Full Zirconia Bonded on Bar

This service provides the perfect combination of aesthetics, durability, and optimal chewing function, allowing patients to achieve a perfect smile and absolute comfort in their daily activities.

Zirconia on bar
Implant Solutions – Khai Nguyen Dental Lab

Implant Solutions

Surgical Guide for Implant Placement

The surgical guide is custom-designed for each patient, based on imaging data and a specific treatment plan, to optimize the position and angle of the implant posts.

Surgical guide
Implant Solutions – Khai Nguyen Dental Lab

Implant Solutions

Implant Bridges and Crowns

An effective dental restoration solution for patients who have lost one or more teeth. This service not only restores chewing function but also provides high aesthetic value, helping patients regain confidence with a perfect smile.

Implant bridges
CAD Block – Khai Nguyen Dental Lab

CAD Block

Celtra Duo (Zirconia Reinforced)

Dentsply Sirona zirconia-reinforced lithium silicate (ZLS) with about 10% zirconia: 210 MPa polished, 370 MPa after firing; for crowns, inlays/onlays and veneers.

Celtra Duo
CAD Block – Khai Nguyen Dental Lab

CAD Block

IPS e.max CAD (Lithium Disilicate)

Ivoclar IPS e.max CAD lithium disilicate: designed from your scans, milled, crystallized and finished in our lab for crowns, veneers and inlays/onlays; 530 MPa flexural strength.

e.max CAD
Ten Amber Mill veneers in 1M1–1M2 seated on the model, frontal view, made by Khai Nguyen Dental Lab

CAD Block

Amber Mill (Lithium Disilicate)

HASS lithium disilicate CAD/CAM block for veneers, crowns, inlays and onlays: five translucency levels from one block, over 300 MPa.

Amber Mill
CAD designs by Khai Nguyen: wax-ups, crowns, bridges, abutments, All-on-X framework, splints

CAD Block

Dental CAD Design Service

Crowns, veneers, abutments, implant crowns, splints and All-on-X designed from your scan files: 12 hours, 24 hours for All-on-X, 2-hour express.

CAD design
Occlusal Appliances – Khai Nguyen Dental Lab

Occlusal Appliance

Jaw Stabilization Splint

A hard full-arch splint in medical-grade resin meeting FDA standards: protects teeth and restorations in bruxers and supports TMD treatment.

Jaw splint
Custom sports mouthguard made at Khai Nguyen, clear layer with glitter design

Occlusal Appliances

Custom Sports Mouthguard

Sports mouthguards made on the athlete's models: multi-layer vacuum forming for shock absorption, 2–6 mm by sport, custom colours and logos.

Sports mouthguard
Sleep Disorder Treatment Appliances – Khai Nguyen Dental Lab

Occlusal Appliance

Sleep Apnea Appliance (Anti-Snoring Device)

Snoring treatment methods range from non-invasive approaches (such as CPAP machines that create positive airway pressure and anti-snoring appliances) to invasive treatments (such as surgery to correct abnormalities in the nose or throat that obstruct the airway, and daily medication).

Sleep apnea appliance

There are currently no products available. We will update this product soon.

A Vietnam dental laboratory built for overseas clinics

Khai Nguyen Dental Lab was founded in 2017 in Ho Chi Minh City, a few minutes from Tan Son Nhat International Airport. We are a full-service Vietnam dental laboratory working only for dentists and dental laboratories. We do not treat patients and do not sell to the public. Most of our partners are clinics and labs in the United States, Australia and Western Europe that send intraoral scans (STL, PLY or DCM) from any major scanner, or physical impressions by courier.

What our Vietnam dental lab produces

The product tabs above list every restoration we make, each with its own page for indications, specifications and documents:

To see the finished work rather than the catalogue, browse our featured cases.

Production times and delivery

Restoration Typical in-lab time
Monolithic zirconia crown or bridge 2–4 working days
Pressed lithium disilicate crown, veneer, inlay or onlay 2.5–4 working days
Layered or cut-back esthetic work 3–5 working days
Implant crowns and bridges 3–4.5 working days
CAD design only 12 hours (All-on-X 24 hours)

Physical restorations ship by DHL Express, which reaches most destinations in 2–4 days. The lab works Monday to Saturday, 08:00–19:00 Indochina Time (GMT+7). Courier options and cut-off times are on our turnaround and shipping page.

Quality, materials and warranty

Our quality management system is certified to ISO 13485:2016 (ISOCERT certificate No. 9199293420717-MED, valid to 10 March 2028). We use genuine branded materials from 3M, Ivoclar, Dentsply Sirona, GC and Shofu, and record the brand and lot number for every case. Every restoration carries a written warranty of 6 months to 15 years depending on the product line, backed by a published remake policy.

How to start with our lab

  1. Send your scan. Upload the intraoral scan (STL, PLY or DCM) with the prescription: restoration type, material, shade and due date. Physical impressions or models can be shipped to us by DHL Express. Scanners and files we accept.
  2. Approve the design. Our CAD team designs in exocad. On request you get a design preview before production, so contacts, occlusion and contour are approved by you.
  3. Receive the restoration. After quality control on the model, the case ships by DHL Express with tracking and case photos, usually 2–4 days door to door.

Send a free trial case See the ordering process

Outsourcing to an overseas lab for the first time? Our Vietnam dental lab outsourcing guide covers onboarding, the full workflow and pricing. Still comparing laboratories? Read our comparison of dental labs in Vietnam, or compare the ceramics in zirconia versus e.max versus feldspathic.

Frequently asked questions

Our laboratory is at 10/40-42 Xuan Dieu Street, Tan Son Nhat Ward, Ho Chi Minh City, Vietnam, a few minutes from Tan Son Nhat International Airport. We work Monday to Saturday, 08:00–19:00 Indochina Time (GMT+7).

Yes. Our quality management system is certified to ISO 13485:2016 by ISOCERT, certificate No. 9199293420717-MED, valid to 10 March 2028. You can verify it on the ISOCERT lookup; scans are on our certificate page.

Open STL, PLY and DCM files from any intraoral scanner, including iTero, 3Shape TRIOS, Medit, Primescan, Carestream and Shining 3D. Silicone impressions and stone models are also accepted by courier.

In-lab time is 2–4.5 working days for most crowns, bridges, veneers and implant restorations, and 3–5 working days for layered esthetic work. DHL Express then reaches most destinations in 2–4 days. See turnaround and shipping for details.

Only genuine branded materials: 3M Lava, IPS e.max (Press, CAD, ZirCAD Prime), Dentsply Sirona Cercon and Celtra Duo, Dental Direkt DD Bio, GC Initial LiSi Press and Shofu Vintage LD Press. The brand and lot number are recorded for every case.

Every restoration has a written warranty of 6 months to 15 years depending on the product line. If a unit does not fit or fails under normal use within that period, we remake it. The terms are in our remake policy.

Yes. Your first case is free, so you can judge fit, contacts and esthetics on a real patient before committing. Request a trial case.

No. We work only for dentists and dental laboratories, and do not treat patients or sell to the public.