Case: LiSi Press veneers, shade A1
Pressed lithium disilicate with a layered incisal edge and three hand-finishing steps.
Read the case study →
Crowns and bridges: monolithic or layered zirconia, IPS e.max Press. See the case study zirconia crowns and veneers over uneven prep shades.
Veneers: pressed lithium disilicate or hand-layered feldspathic. Case studies: LiSi Press A1, feldspathic diastema closure. Inlays and onlays: case study, product page.
All-on-X: full-arch screw-retained bridges with ceramic gingiva. See the upper and lower All-on-X case study.
Single implant crowns: screw-retained or cemented, Ti-base or custom abutment. See the tooth 11 hybrid abutment case study or the product page.
Surgical guides and digital appliances: designed from CBCT and intraoral scan data. What to send the lab, product page.
Splints and mouthguards: occlusal splints, sports guards and snap-on appliances from a digital scan. Occlusal splint product page.
How each case study is written up
Each tile above opens a case study. The write-ups follow the same structure so you can compare them quickly: a case summary table (indication, material, shade, dentist), the dentist’s brief, why the material was chosen, the lab workflow, and lessons for similar cases. Most posts name their photo source, the original post on the lab’s Instagram or Facebook. Some cases name the dentist or clinic; others state that the dentist chose not to be named. The case studies do not name patients.
Cases by indication
- Pressed veneers: LiSi Press in A1 and three finishing steps, ten LiSi Press veneers in BL2, 20 e.max veneers replacing old composite veneers, ten Amber Mill veneers following the approved wax-up.
- Feldspathic veneers: diastema closure on the central incisors, a 0.2 mm veneer on tooth 21, a ten-unit feldspathic case, an e.max crown with feldspathic veneers in OM1.
- Zirconia crowns and bridges, and combinations with veneers: masking uneven preparation shades, veneers 14–24 with zirconia crowns on 11 and 21, a three-unit ZirCAD Prime bridge 11–13, twelve ZirCAD Prime units in A3–A3.5.
- Inlays, onlays and overlays: e.max inlays, onlays and overlays.
- Full-arch and bite-raising work: vertical dimension rehabilitation with a digital workflow, full zirconia for a bruxing patient, full-mouth rehabilitation combining veneers, onlays, crowns and implants.
- Single implants: tooth 11 with a hybrid abutment and Lava crown in A2.
- Full-arch implant restorations: upper and lower All-on-X with ceramic gingiva, All-on-6 FP1 on AnyRidge implants, zirconia overlay on a CAD/CAM titanium iBar.
Cases with partner clinics
Some posts describe work done with a named dentist or clinic: full-arch e.max veneers and bite raising with Dr Sai Aom Kham, anterior veneers with Nhan Tam Dental, a single e.max crown with Dr Mai Tran, full-arch ZirCAD Prime with Far East Dental, All-on-X on titanium thimbles with Paris Dental, gingivectomy and full-arch veneers with Sunrise Dental Clinic, Dr Tony Dental.
From a sample case to your own
To browse further, use the Anterior Aesthetics, Implant Restoration and Restoration Materials categories. To pick a material for a similar case, see the dental ceramic materials comparison. Production takes 2–4.5 working days depending on material and unit count, and international cases ship by DHL in 2–4 days. Clinics and labs that have not worked with us before get their first case free of charge; the steps are in the ordering process, or reach us on WhatsApp +84 902 945 585.
