Case fabricated at Khai Nguyen Dental Lab to the treating dentist’s prescription, presented in our laboratory brochure. No patient-identifying information is included. Case summary Indication Fixed full-arch upper restoration, screw-retained on six implants (All-on-6) Implant system AnyRidge (Megagen) Design FP1: replaces the crowns only, no pink gingiva Workflow Immediate loading with a provisional; final impressions…
Category Archives: Implant Restoration
Implant crowns and bridges, abutment selection, hybrid restorations, full-arch implant prostheses and surgical guides. Articles and workshops on the implant restorative workflow between clinic and lab.
An All-on-4 case in the FP1 configuration, recently completed at Khai Nguyen on Aidite 3D Pro zirconia in shade A2. How FP1 differs from the rest In the classification of full-arch implant restorations, FP1 replaces the clinical crown only, not the gingiva. The restoration therefore has to terminate against the patient’s own soft tissue, which…
Khai Nguyen Dental Lab would like to thank the clinicians at Paris Dental for their trust, and for sending back the clinical images taken after delivery. The case This was an All-on-X full-arch implant restoration, built on titanium thimbles as the connection between the implants and the ceramic superstructure. Why the connection matters In full-arch…
Implant Restoration
Intraoral Photogrammetry (IPG) for Full-Arch Implants: What It Solves and What It Does Not Replace
Three ways to record full-arch implant positions compared, why IPG error does not accumulate along the arch, the clinic-lab workflow, and what photogrammetry cannot replace.
Implant Restoration
Bar-Supported Full-Arch Restorations: Full Contour or Split iBar, and Polishing the Bar Below the Gingiva
Three constructions for fixed full-arch implant restorations, a full-contour Aidite 3D Pro iBar case, the digital workflow from bar to overlay, and why polishing the bar below the gingiva decides success.
Implant Restoration
Case Study: Implant at Tooth 11 with a Custom Hybrid Abutment and Lava Zirconia Crown in A2
Central-incisor implant: a custom hybrid abutment copying the tissue profile shaped by the dentist, 0.5 mm tissue pressure as prescribed, 3M Lava zirconia crown in A2.
Full-arch Aidite 3D Pro zirconia overlay bonded to a CAD/CAM titanium iBar: two fits that must be right, teeth and bar designed together, multi-shade ceramic gingiva.
Implant Restoration
Case Study: Upper and Lower All-on-X Restorations with Ceramic Gingiva and Custom Tooth Anatomy
Two screw-retained full-arch bridges on multi-unit abutments under an All-on-X protocol: passive fit, designing both arches together and multi-shade pink ceramic gingiva.
- 1
- 2
